Error code · Cooktop

Whirlpool Induction Cooktop Code E_35: Alert That Needs a Closer Look

Medium · inspection needed

Code: E_35
Appliance: Cooktop
Brand: Whirlpool
Warranty: 30-day workmanship

What E_35 means

E_35 is shown by Whirlpool induction cooktops such as the WCI55US0JS, and the only published instruction is a power reset. It does not tell owners which sensor or circuit raised it. That leaves us to treat it as an internal alert: first clear it by cutting power and cooling the cooktop, then see if it stays away. If the display repeats E_35, the cooktop needs to be checked rather than used.

Common causes of E_35

Short-lived electronic alert that a reset clears
Residual heat in the cooktop when the alert occurred
Control circuit that keeps flagging the same condition

✓ One safe check you can try

1. Turn the controls off and let the glass cool. 2. Flip the cooktop's breaker off for a full minute, then back on. 3. Hold off cooking until the cooktop has cooled down. 4. Stay nearby for a minute to see whether E_35 returns. 5. If it does, leave the cooktop off and book a visit.

! Why to stop there

Because nothing is named for E_35, we trace the circuit that raises it.
We check whether the alert tracks with heat, with a particular zone, or with power quality.
You get the price in writing before work, and every repair has a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

FCRFWhirlpool Cooktop Code FCRF Means a Right Front Element Circuit Problem HWhirlpool Induction Cooktop H: Hot Cooking Zone Indicator Lights Not Turning OnWhirlpool Smoothtop Cooktop Indicator Lights Not Turning On: No Power or Dead Controls Indicator or Display FlashingWhirlpool Cooktop Indicator or Display Flashing: Pressed Keys or an Unsuitable Pan Indicator or Hot Light OnWhirlpool Smoothtop Cooktop Hot Light On: Control Still on or Glass Still Hot LockWhirlpool Smoothtop Cooktop Lock: Control Lock Is on Performance Boost FlashingWhirlpool Induction Cooktop Performance Boost Flashing: Zone Limited Power Level Lower Than Level RequestedWhirlpool Induction Cooktop Power Level Lower Than Requested, a Power Limit at Work

E_35E_35 questions

What part does E_35 point to?

None is published. The code is a general alert, which is why we look at the control and its wiring if a reset does not settle it.

How long should I wait before concluding it is gone?

Watch the display for a minute after power returns, then cook normally. If it comes back during that cooking session, treat it as a real problem.

Is it all right to keep trying the reset?

One or two resets are fine. If E_35 keeps returning, repeated resets only delay finding the cause, and we would rather inspect it. We would rather read the circuit once than have you guess at it.

Book a visit

Still seeing E_35?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107