Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

Whirlpool Oven Shows F7E0: Door Latch Circuit or Water Level Reading

F7E0 carries different meanings by platform. On Whirlpool ranges, such as the WFE525S0HS and WFG515S0ES, the guidance lists the oven door latch assembly and the wiring. On built-in wall ovens, such as the WOC54EC7HS, it lists…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F7E0
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What F7E0 means

F7E0 carries different meanings by platform. On Whirlpool ranges, such as the WFE525S0HS and WFG515S0ES, the guidance lists the oven door latch assembly and the wiring. On built-in wall ovens, such as the WOC54EC7HS, it lists the water level, or the water level sensor, and the wiring. The reset is the same one-minute breaker routine. So on a range think door lock, and on a wall oven with a water feature think water level. Check which kind you have before reading further.

Common causes of F7E0

  • Door latch assembly, on ranges
  • Water level sensor or water level reading, on wall ovens
  • Wiring in either circuit
  • Control reading the input wrongly
✓ One safe check you can try

1. On a range, close the oven door firmly and clear its path. 2. On a wall oven with a water feature, check that the reservoir or fill area is seated and filled as the owner's manual says. 3. Turn the breaker off for one minute, then on. 4. Watch the display for a minute. 5. Then run a quick cycle and confirm the oven behaves.

! Why to stop there
  • The same characters mean different things on a range and a wall oven, so we start by confirming your model
  • If F7E0 returns we test the latch circuit or the water level circuit as the model calls for
  • You receive the price in writing before work
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating LOCLOC on a Whirlpool Range or Wall Oven: Control Lock Is On LockWhirlpool Range Cooktop Lock: Unlocking the Surface Controls PowerLossWhirlpool Range and Wall Oven PowerLoss: Reset the Time
F7E0F7E0 questions
Why does F7E0 mean two things?

Manufacturers reuse display characters across platforms. For a range the guidance names the door latch, and for a wall oven it names the water level, so your model decides.

My wall oven has no water feature. What then?

The guidance names the water level circuit for wall ovens, but we confirm on your exact model what applies. Give us the model number when you call.

Is the reset safe?

Yes, switching the breaker off for one minute and on again is the published step. Do not open panels. Leave everything else closed and call us if the code stays.

Book a visit

Still seeing F7E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107