Error code · Range

Meat Probe Not Seated: Whirlpool Oven Code F3E4

Low risk · DIY check OK

Code: F3E4
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What F3E4 means

F3E4 on a Whirlpool freestanding or slide-in range, such as the WFE515S0ES or WFG525S0HV, calls for one check first: make sure the meat probe is pushed fully into its receptacle, since the location varies. On built-in wall ovens, such as the WOD51EC0HS, the same code can come from the meat probe or, on some models, from a power attachment on a roll-out rack that has come unplugged. If neither explains it, the usual breaker reset applies.

Common causes of F3E4

Meat probe not seated in its receptacle
Roll-out rack power attachment unplugged, on wall ovens with one
Probe jack or connector worn or dirty
Control reading the probe input wrongly

✓ One safe check you can try

1. Remove the meat probe, then push it firmly all the way into its receptacle; check the owner's manual for where it sits on your oven. 2. On a wall oven with a roll-out rack, check the power attachment is in the right place and push the rack firmly in until you hear a tone. 3. Turn the breaker off for one minute, then back on. 4. Watch the display for one minute. 5. Verify operation with a short cycle.

! Why to stop there

If the probe and the rack seat correctly and F3E4 still returns, the probe jack or the control input needs testing
We check the probe and its connector for wear, which an owner cannot judge by eye
A written price comes first, and the 30-day workmanship warranty covers the work

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating LOCLOC on a Whirlpool Range or Wall Oven: Control Lock Is On LockWhirlpool Range Cooktop Lock: Unlocking the Surface Controls PowerLossWhirlpool Range and Wall Oven PowerLoss: Reset the Time

F3E4F3E4 questions

I was not using the meat probe. Why F3E4?

The code can appear if the probe is plugged in or lying in the oven without being seated, or if the connector is worn. Remove the probe and check its receptacle before the reset.

What is the power attachment on a wall oven?

Some wall ovens have a roll-out rack with a power attachment that can come unplugged. Push the rack firmly in until a tone sounds, as the guidance says.

Will F3E4 stop normal baking?

Possibly for a probe-based cycle, and sometimes for any cycle until the code is cleared. If seating the probe and a reset do not help, we test the circuit.

Book a visit

Still unsure about F3E4?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107