Error code · Range

F1-H on a Whirlpool Range: Oven Sensor Circuit Review

Medium · inspection needed

Code: F1-H
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What F1-H means

Gas and electric Whirlpool ranges, freestanding or slide-in, can show F1-H, the WFE515S0ES and WFG525S0HV among them. The guidance is a power reset, and the areas it names are the oven temperature sensor, the control and the wiring. In simple terms, the oven is not receiving or handling its temperature signal properly. The code stays on the display, and the oven may not heat or may fail to hold the right temperature while it is shown.

Common causes of F1-H

Oven temperature sensor
Sensor wiring and connector
Control receiving the temperature signal

✓ One safe check you can try

1. Switch the oven off and wait for it to cool completely. 2. At the household panel, cut power to the range for sixty seconds. 3. Restore power. 4. Stay by the range for one minute and note whether F1-H returns. 5. Verify the oven with a short bake.

! Why to stop there

F1-H returning after a reset means the temperature circuit still needs testing
We measure the sensor and check the wiring before we suggest a part
You will have the price in writing before any repair is started

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode PowerLossWhirlpool Range and Wall Oven PowerLoss: Reset the Time Press Cancel to ResetWhirlpool Range Message "Press Cancel to Reset": What to Do Probe or Insert ProbeWhirlpool Range Probe Message: Meat Probe Not Detected FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit

F1-HF1-H questions

Is the H in F1-H the same as the H hot-surface reminder?

No. The H alone in the heat setting window means a hot cooktop. F1-H is an oven code with a dash, and it has its own guidance.

Can I bake while F1-H is displayed?

It is better not to, since the oven may not control its temperature properly. Reset once, and if the code returns, leave the oven off until we check it.

Is this common on newer ranges?

The guidance covers current Whirlpool ranges too, not only older ones. Whatever the age of your range, we test the circuit and give you a written price before any work begins.

Book a visit

Still seeing F1-H?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107