Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

Whirlpool Range 3D41: Probe and Receptacle Signal Check

3D41 shows on Whirlpool freestanding and slide-in ranges such as the WFE525S0HS when the oven control is looking for the meat probe and does not find it securely connected. As with its neighbors in this group,…

Low risk · DIY check OK
Book a Service Call(713) 589-6107
Code
3d41
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What 3d41 means

3D41 shows on Whirlpool freestanding and slide-in ranges such as the WFE525S0HS when the oven control is looking for the meat probe and does not find it securely connected. As with its neighbors in this group, the probe receptacle is where the plug goes, and its position varies by model. In daily use you will see a probe setting that will not run while 3D41 stays up.

Common causes of 3d41

  • Probe not inserted all the way
  • Worn probe lead
  • Receptacle contact problems inside the oven
✓ One safe check you can try

1. Allow the oven to cool completely. 2. Seat the probe plug again, pushing until it stops. 3. Turn the range's breaker off for one minute, then on. 4. Wait a minute and read the display. 5. If the code remains, cook without the probe and book a visit.

! Why to stop there
  • A returning 3D41 means the probe path itself needs a test.
  • We look at the probe, its plug and the receptacle one at a time.
  • The price is written first, and the work carries our 30-day workmanship warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating
3d413d41 questions
Why three different probe codes?

The control reports slightly different readings for the same kind of trouble. All three ask us to check the probe and receptacle, and we note which one your display shows.

Is it safe to leave the probe in the oven?

Leave it in only while cooking with it, and remove it before cleaning or storing. Heat and spills shorten the life of the lead. A coiled lead hanging in a hot oven rarely survives.

What if my oven is older?

We repair ranges of every age, and if a probe repair is not worth it, we say so plainly. The answer comes with a written price, not a guess.

Book a visit

Still unsure about 3d41?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107