Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

Whirlpool Range Code 1C82 for the Control: Wiring Alert

A reading of 1C82 on a Whirlpool freestanding or slide-in range, such as the WFE525S0HS, means the control has flagged its own circuit or the lines serving it. Gas and electric models both use the code.…

High · stop use, call now
Book a Service Call(713) 589-6107
Code
1c82
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What 1c82 means

A reading of 1C82 on a Whirlpool freestanding or slide-in range, such as the WFE525S0HS, means the control has flagged its own circuit or the lines serving it. Gas and electric models both use the code. Since the display only gives a number, what you notice is the oven acting up: it might not heat, might stop mid-cycle, or might ignore the keypad until the power has been cycled.

Common causes of 1c82

  • The oven control board
  • Connections between the control and the keypad or sensors
  • Harness wiring that has loosened
✓ One safe check you can try

1. At the breaker panel, turn the range off for one full minute. 2. Turn it on and wait a minute. 3. Watch whether 1C82 reappears. 4. Run a short bake to confirm normal heating. 5. Keep your hands out of the back of the range and call us if the code returns.

! Why to stop there
  • It could be the board, a connector or a wire, and the code alone cannot tell us.
  • We test what the control receives from the keypad and sensors before replacing it.
  • The price is written before any work, and our 30-day workmanship warranty applies.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode LockWhirlpool Range Cooktop Lock: Unlocking the Surface Controls PowerLossWhirlpool Range and Wall Oven PowerLoss: Reset the Time Press Cancel to ResetWhirlpool Range Message "Press Cancel to Reset": What to Do Probe or Insert ProbeWhirlpool Range Probe Message: Meat Probe Not Detected FEE6Whirlpool Range Code FEE6: Bake Element Circuit
1c821c82 questions
Should I treat 1C82 like 1C81?

They are neighbors in the same group and point to the same area. They are separate codes, so we note which one your range shows before we begin.

Is it safe to cook on the stovetop with 1C82 showing?

On many ranges the burners are independent of the oven control, but we cannot say that for yours. If anything else looks wrong, stop cooking and let us inspect.

Why did the code appear out of nowhere?

A power flicker or a worn connection can trigger it. Whether it was a one-time event shows up in the next days of normal use.

Book a visit

Still seeing 1c82?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107