Model library · Whirlpool Range

YWFE775H0HB

Whirlpool YWFE775H0HB Electric Range Repair

Most common issues on this model

Oven temperature that drifts from the dial or display
Element that sparks or buzzes when the burner comes on
Cooktop switch that gives only high heat
Oven door hinge or latch that no longer holds firmly

The YWFE775H0HB is a freestanding electric range. In Houston it is most often found in single-family kitchens where the range has stood in the same spot for a long time, with a 240-volt outlet behind it and a cabinet gap on each side.

Models of this type have several surface switches and an oven control, so a service call usually comes down to which part of the range is off. If the cooktop gives only high heat, we look at the burner switch. If an element sparks, we pull it and check the receptacle for burned contacts. If the oven drifts from the set temperature, we compare the sensor with a thermometer and look at the control.

Endings such as YWFE775H0HB0, YWFE775H0HB1 and YWFE775H0HB2 are listed for this number, and the plate on the range tells us which applies. You see the price in writing before we start, and 30 days of warranty cover our labor.

Key features

Electric range
Freestanding design
Revision endings include YWFE775H0HB0, YWFE775H0HB1 and YWFE775H0HB2

→Codes

Error codes this model can show

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode PowerLossWhirlpool Range and Wall Oven PowerLoss: Reset the Time Press Cancel to ResetWhirlpool Range Message "Press Cancel to Reset": What to Do Probe or Insert ProbeWhirlpool Range Probe Message: Meat Probe Not Detected FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit

YWFE775H0HBYWFE775H0HB questions

My range burner only seems to run on high. What is wrong?

A burner switch that no longer steps through heat settings is a common cause on an electric range. We test the switch contacts and the element, and replace only the part that fails the test.

An element sparks when it turns on. Is it safe to keep using?

Turn it off and do not use that burner. Sparking usually means a worn element end or a burned receptacle. We inspect both and replace what is damaged before the burner is used again.

Does the ending on my YWFE775H0HB number change the parts?

It can. Endings such as HB0, HB1 and HB2 mark revisions, and a control or switch may differ between them. We confirm the complete label before ordering anything.

Book a visit

Book repair for your YWFE775H0HB

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 589-6107