Model library · Whirlpool Cooktop

RCS2012GS

Whirlpool RCS2012GS Electric Cooktop Repair

Most common issues on this model

Element and switch checks zone by zone
Terminals at the supply for heat marks
Control knobs and shafts
Width and cutout fit confirmed on site

The RCS2012GS is a Whirlpool built-in electric cooktop, listed as an electric counter unit. No width is given for it, so we measure the cutout on site. The number is also sold as RCS2012GS0, RCS2012GW and RCS2012GW1, which are other finishes or revisions of the same cooktop.

Houston kitchens that keep an older built-in electric cooktop are usually glad to keep it, and the work is often simple: a worn element, a switch that no longer passes full power, or a loose terminal. We check the supply, then test each zone in turn so we know exactly which part is out.

We read the complete model and serial from the label before ordering parts, because the suffix can change the part list. You approve a written price first, our repairs carry a 30-day workmanship warranty, and we say so when an older cooktop is not worth fixing.

Key features

Built-in electric cooktop
Whirlpool electric counter unit
Other suffixes: RCS2012GS0, RCS2012GW, RCS2012GW1

→Codes

Error codes this model can show

Power Level Lower Than Level RequestedWhirlpool Induction Cooktop Power Level Lower Than Requested, a Power Limit at Work U-uWhirlpool Induction Cooktop U-u: No Suitable Pan Detected FC E1Whirlpool Cooktop Code FC E1: Touchpad Message FC E4Whirlpool Cooktop Code FC E4: Harness to the Touchpad FC LFWhirlpool Cooktop Code FC LF: Left Front Element Circuit FC LRWhirlpool Cooktop Code FC LR: The Left Rear Cooking Position FC RRWhirlpool Cooktop Code FC RR: Right Rear Element and Wiring FCRFWhirlpool Cooktop Code FCRF Means a Right Front Element Circuit Problem

RCS2012GSRCS2012GS questions

How do I find the right parts for my RCS2012GS?

We read the full model and serial from the label, since GS, GW and revision digits can change the part list. The label also tells us the build revision, which is worth knowing on an older unit.

Why would only one zone stop heating?

That is typically the element or its switch. We test them separately with a meter so only the part that is out gets replaced. A dead zone and a whole dead cooktop have different causes, so we also confirm the supply.

Is the cooktop's width a problem when replacing it?

Replacement fit depends on the cutout, which we measure on site. We tell you what will fit before you buy anything. If the cutout is odd or the counter is cut tight, we say so before any part is ordered.

Book a visit

Book repair for your RCS2012GS

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 589-6107