Error code · Range Hood

Whirlpool Vent Hood Lights Out: Checks Before a Repair

When the lights on a Whirlpool vent hood do not come on, the cause is often simple. The first things to look at are the light controls, the bulbs, and the power to the hood. If…

Low risk · DIY check OK

Book a Service Call (713) 589-6107

Code: Vent Hood Lights not Operating
Appliance: Range Hood
Brand: Whirlpool
Warranty: 30-day workmanship

What Vent Hood Lights not Operating means

When the lights on a Whirlpool vent hood do not come on, the cause is often simple. The first things to look at are the light controls, the bulbs, and the power to the hood. If the fan runs, the lights should work too, so a working fan with dead lights points toward the bulbs or the light circuit. There is no display code in this case, only lamps that stay dark.

Common causes of Vent Hood Lights not Operating

Light control set incorrectly
Bulbs burned out and in need of replacement
Power to the hood interrupted
The light circuit or its wiring

✓ One safe check you can try

1. Confirm the light control is set the way the owner's manual describes. 2. Replace the bulbs, following the bulb instructions in the manual, after the hood has cooled. 3. Turn the hood's circuit breaker off for one minute and back on. 4. Check that the lights come on.

! Why to stop there

New bulbs that stay dark mean the problem lies in the socket or wiring, which needs a test.
We check the light circuit with the hood powered down.
A written price comes before any work, and we cover repairs with a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range Hood codes

CA C on a Whirlpool Vent Hood: Charcoal Filter Reminder FGrease Filters and the F Display: Whirlpool Vent Hood Reminder

Vent Hood Lights not OperatingVent Hood Lights not Operating questions

My hood fan works but the lights do not. Why?

The fan and the lights use separate circuits. When the fan runs, the lights should work as well, so we begin with the bulbs and the light control.

Which bulb should I buy?

Use the bulb type listed in your owner's manual. Using the wrong type can leave the lamp dark or shorten its life. Let the old bulb cool before you touch it.

Will resetting the breaker help?

Sometimes. Power off for one minute, then restore it and check the lights. If they remain dark, a socket or wiring check is the next step.

Book a visit

Still unsure about Vent Hood Lights not Operating?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107