Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

F1-9 on an Older Whirlpool Range: Oven Control Message

F1-9 turns up on older Whirlpool freestanding and slide-in ranges, the WFG515S0ES line being one, when the oven control has noticed a condition it cannot clear alone. All the published guidance says is to take power…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F1-9
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What F1-9 means

F1-9 turns up on older Whirlpool freestanding and slide-in ranges, the WFG515S0ES line being one, when the oven control has noticed a condition it cannot clear alone. All the published guidance says is to take power off at the breaker for a minute and restore it. It names the oven control and its wiring, but not the sensor, the door or the keypad. We repair these older ranges, and we are frank when a repair is not worth it.

Common causes of F1-9

  • Oven control
  • Wiring and connectors into the control
✓ One safe check you can try

1. Find the breaker that feeds the range and switch it off for a full minute. 2. Switch it back on. 3. Stay near the range for a minute to see whether F1-9 reappears. 4. Start a short bake to verify that the oven works. 5. If the code returns, leave the oven off.

! Why to stop there
  • Whether the control or its wiring is the cause stays unknown until it is tested
  • We check the cheaper wiring side before proposing a control
  • A written price is given before we start, and our workmanship is warranted for 30 days
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating
F1-9F1-9 questions
What does it mean that only the control and wiring are named?

It narrows the code to the control electronics and what feeds them. The sensor and the door are not listed, so we start our testing with the control side.

Can I clear F1-9 permanently?

A breaker reset may clear a one-time event. If F1-9 returns, the cause is still present and needs testing, so resets alone will not help for long.

Is an older range worth fixing here?

Often it is. We weigh the age of the range, the part cost and the repair price, then tell you honestly whether repair or replacement is the better use of your money.

Book a visit

Still seeing F1-9?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107