Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Cooktop

Whirlpool Cooktop Code FC E0: Supply, Wiring or Induction Module

FC E0 on a Whirlpool electric radiant smoothtop cooktop is a control code that lists three areas: the electrical supply, the associated wiring, and the induction module. The guidance gives only a power reset. You will…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
FC E0
Appliance
Cooktop
Brand
Whirlpool
Warranty
30-day workmanship

What FC E0 means

FC E0 on a Whirlpool electric radiant smoothtop cooktop is a control code that lists three areas: the electrical supply, the associated wiring, and the induction module. The guidance gives only a power reset. You will see FC E0 on the display, and the cooking areas may not heat. We check each of the three areas before quoting a repair.

Common causes of FC E0

  • The electrical supply reaching the cooktop
  • The wiring in the control circuit
  • The induction module
  • A temporary electrical disturbance
✓ One safe check you can try

1. Turn all cooking areas off. 2. Open the cooktop's circuit breaker for a minute. 3. Switch it back on. 4. Wait a minute and see whether FC E0 returns. 5. If it returns, leave the cooktop off and call us.

! Why to stop there
  • Three areas are listed, so the reset cannot show which is responsible.
  • We measure the supply first, then inspect the wiring and test the module.
  • The price is written before work starts, and the repair has a 30-day workmanship warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Cooktop codes

LockWhirlpool Smoothtop Cooktop Lock: Control Lock Is on Performance Boost FlashingWhirlpool Induction Cooktop Performance Boost Flashing: Zone Limited Power Level Lower Than Level RequestedWhirlpool Induction Cooktop Power Level Lower Than Requested, a Power Limit at Work U-uWhirlpool Induction Cooktop U-u: No Suitable Pan Detected FC E1Whirlpool Cooktop Code FC E1: Touchpad Message FC E4Whirlpool Cooktop Code FC E4: Harness to the Touchpad FC LFWhirlpool Cooktop Code FC LF: Left Front Element Circuit FC LRWhirlpool Cooktop Code FC LR: The Left Rear Cooking Position
FC E0FC E0 questions
What does FC E0 mean on my cooktop?

It points to the electrical supply, the wiring or the induction module and asks for a one-minute breaker reset. The code does not single out one of them.

Is FC E0 an electrical hazard?

The code itself is a control message, but it involves supply and wiring, so do not open panels or probe connections. Leave testing to us.

Why would a smoothtop mention an induction module?

The guidance for this code lists it, so we follow the code and test what the cooktop actually contains. We confirm the exact parts when we inspect it.

Book a visit

Still seeing FC E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107