Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Cooktop

Whirlpool Induction Cooktop Code E_H: Shutoff for High Temperature

Seeing E_H on a Whirlpool induction cooktop, such as the WCI55US0JS, means the internal temperature of the electronics climbed too high. The control panel shut the cooktop off in response, and the code stays up until…

High · stop use, call now
Book a Service Call(713) 589-6107
Code
E_H
Appliance
Cooktop
Brand
Whirlpool
Warranty
30-day workmanship

What E_H means

Seeing E_H on a Whirlpool induction cooktop, such as the WCI55US0JS, means the internal temperature of the electronics climbed too high. The control panel shut the cooktop off in response, and the code stays up until things cool. It reflects heat inside the cooktop, not the pan you were using. Allow plenty of cooling time, then reset the power and test with a moderate setting.

Common causes of E_H

  • Tight installation that traps heat under the glass
  • Extended cooking at high settings
  • Restricted cooling airflow or a slow cooling fan
  • Temperature sensing reading above the true value
✓ One safe check you can try

1. Turn all cooking zones off. 2. Wait until the cooktop has cooled down completely. 3. Make sure the area under and around it is clear. 4. Power the cooktop down at the breaker for a minute, then up again. 5. Cook at a lower setting and watch whether E_H returns.

! Why to stop there
  • When E_H returns after the cooktop has cooled, we test the cooling path and the sensor.
  • We check for heat sources nearby that could be adding to the load.
  • The price is written before work, and a 30-day workmanship warranty stands behind every repair.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Cooktop codes

FC RRWhirlpool Cooktop Code FC RR: Right Rear Element and Wiring FCRFWhirlpool Cooktop Code FCRF Means a Right Front Element Circuit Problem HWhirlpool Induction Cooktop H: Hot Cooking Zone Indicator Lights Not Turning OnWhirlpool Smoothtop Cooktop Indicator Lights Not Turning On: No Power or Dead Controls Indicator or Display FlashingWhirlpool Cooktop Indicator or Display Flashing: Pressed Keys or an Unsuitable Pan Indicator or Hot Light OnWhirlpool Smoothtop Cooktop Hot Light On: Control Still on or Glass Still Hot LockWhirlpool Smoothtop Cooktop Lock: Control Lock Is on Performance Boost FlashingWhirlpool Induction Cooktop Performance Boost Flashing: Zone Limited
E_HE_H questions
Why did the cooktop shut off in the middle of cooking?

The control watches its own temperature. When it climbs too high, it switches the panel off so the electronics are not damaged. That is the code doing its job.

Is it dangerous?

The shutoff itself is protective. Repeated overheating is something we want fixed, because it shortens the life of the electronics. Repeated overheating is still worth fixing, because it shortens the life of the electronics over time.

Can poor ventilation cause E_H?

Yes. The cooktop needs open space to breathe. A cramped cabinet, or items stored against the underside, can hold heat in. Items stored against the underside also hold heat in.

Book a visit

Still seeing E_H?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107