Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Cooktop

Whirlpool Induction Cooktop Code E_22: Cut Power, Then Retest

If your Whirlpool induction cooktop, such as the WCI55US0JS, flashes E_22, the display is reporting an internal alert without naming a burner, pan or sensor. The guidance for this code is short: cut power, let the…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
E_22
Appliance
Cooktop
Brand
Whirlpool
Warranty
30-day workmanship

What E_22 means

If your Whirlpool induction cooktop, such as the WCI55US0JS, flashes E_22, the display is reporting an internal alert without naming a burner, pan or sensor. The guidance for this code is short: cut power, let the cooktop cool, restore power and watch. A single appearance after a power flicker often clears. When E_22 comes back, the control or one of its circuits needs to be read properly.

Common causes of E_22

  • Brief electronic hiccup after a power flicker
  • Cooktop still warm from heavy use
  • Control circuit raising the alert again and again
✓ One safe check you can try

1. Turn off every zone. 2. Shut off the cooktop's breaker, count to sixty, and switch it back on. 3. Give the cooktop time to cool before you start cooking again. 4. Leave it powered for a minute and look for E_22. 5. If it shows again, stop and tell us what you were doing when it appeared.

! Why to stop there
  • The code does not say which circuit is involved, so we trace it with the cooktop opened up.
  • We note whether E_22 shows at start-up, under load, or after the cooktop heats.
  • Pricing is explained in writing before work, and a 30-day workmanship warranty covers the repair.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Cooktop codes

Indicator or Display FlashingWhirlpool Cooktop Indicator or Display Flashing: Pressed Keys or an Unsuitable Pan Indicator or Hot Light OnWhirlpool Smoothtop Cooktop Hot Light On: Control Still on or Glass Still Hot LockWhirlpool Smoothtop Cooktop Lock: Control Lock Is on Performance Boost FlashingWhirlpool Induction Cooktop Performance Boost Flashing: Zone Limited Power Level Lower Than Level RequestedWhirlpool Induction Cooktop Power Level Lower Than Requested, a Power Limit at Work U-uWhirlpool Induction Cooktop U-u: No Suitable Pan Detected FC E1Whirlpool Cooktop Code FC E1: Touchpad Message FC E4Whirlpool Cooktop Code FC E4: Harness to the Touchpad
E_22E_22 questions
Does E_22 point to a broken burner?

Not by itself. No burner or part is named for it. It is a general alert, and the reset is the only step suggested for owners.

Why wait for the cooktop to cool?

Heat in the electronics can trigger alerts. Letting the cooktop cool before the next use removes that variable and shows whether the code is real.

How do I know it is time to call?

When E_22 returns after a reset and a cool-down, it is no longer a one-off. We then test the control and its wiring instead of leaving you guessing.

Book a visit

Still seeing E_22?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107