Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

Whirlpool Range Code 1C1C: Keypad Wiring Check

On Whirlpool freestanding and slide-in ranges, electric or gas, such as the WFE515S0ES or WFG525S0HV, 1C1C points to the user interface (the keypad) or its wiring. The oven control reports that it is not getting a…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
1c1c
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What 1c1c means

On Whirlpool freestanding and slide-in ranges, electric or gas, such as the WFE515S0ES or WFG525S0HV, 1C1C points to the user interface (the keypad) or its wiring. The oven control reports that it is not getting a clean signal from the pad. You see 1C1C on the display, and the oven may not respond to your presses or may stop a cycle. The cooktop is a separate circuit on many ranges.

Common causes of 1c1c

  • The user interface or keypad
  • Wiring and connectors between the keypad and the control
✓ One safe check you can try

1. Turn off the range's circuit breaker and leave it off for one full minute. 2. Turn the breaker back on. 3. Watch the display for a minute to see whether 1C1C returns. 4. Try a short bake to confirm the oven responds. 5. On a gas range, if you ever smell gas, leave the house and call the gas utility from outside.

! Why to stop there
  • The reset does not say which side of the keypad connection has the problem.
  • We test how the pad responds, then the harness behind it, before suggesting a part.
  • You get the price in writing first, and the repair has a 30-day workmanship warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot
1c1c1c1c questions
Does 1C1C mean the oven control is dead?

Not necessarily. The report names the keypad or its wiring. We check those first, because a pad is a smaller repair than a control. The reset steps are free, so try them first.

Can I use my burners while 1C1C shows?

On many ranges the burners run on separate circuits, but we cannot promise it for yours. If anything seems off, stop and let us look.

Is it worth fixing an older range?

Often yes, since the rest of the range is usually sound. We tell you plainly when a repair is not worth it. Age alone is rarely the deciding factor; the price of the part is.

Book a visit

Still seeing 1c1c?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107