Whirlpool Dishwasher Code F1E1: Control Module
F1E1 on a Whirlpool built-in dishwasher lists the control module as its potential cause. The control module is the electronic board that runs the cycles, so the dishwasher may not start, stop mid-cycle or ignore the…
- Code
- F1E1
- Appliance
- Dishwasher
- Brand
- Whirlpool
- Warranty
- 30-day workmanship
What F1E1 means
F1E1 on a Whirlpool built-in dishwasher lists the control module as its potential cause. The control module is the electronic board that runs the cycles, so the dishwasher may not start, stop mid-cycle or ignore the buttons. The same code appears as one blink, a pause and one blink on the lights of older models. Resetting power is the first step the guidance gives.
Common causes of F1E1
- The control module (main board)
- A passing electronic error cleared by cycling power
- Connections to the control if the code returns
1. Unplug the dishwasher for 30 seconds, then plug it back in. 2. If it is hard wired, turn its breaker off for 30 seconds and back on. 3. Close the door firmly. 4. Start a short cycle to see if F1E1 returns. 5. If it does, call us.
- A reset that fails leaves open whether the board or its connections are the cause.
- We test the control and its connections before we recommend a part.
- You approve the written price first, and the repair has a 30-day workmanship warranty.
Other Dishwasher codes
What does F1E1 mean on a Whirlpool dishwasher?
The guidance lists the control module as the potential cause and starts with a 30-second power cycle.
Does F1E1 mean the whole dishwasher is dead?
Not necessarily. The control module is one part. We test it first and tell you plainly if an older dishwasher is not worth the repair.
Can I keep using the dishwasher after F1E1 clears?
If the code stays away and the cycle runs normally, yes. If it returns, stop and have us check the control.
Still seeing F1E1?
A technician diagnoses it on site and gives you the price in writing before any work starts.