Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Dishwasher

Whirlpool Dishwasher Blinks 6 Pause 1 Pause, the F6E1 User Interface Error

Six blinks, a pause and one blink on an older Whirlpool built-in dishwasher is F6E1. The stated potential cause is a user interface error involving the main control. In plain words, the buttons and display side…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
6 Pause 1 Pause
Appliance
Dishwasher
Brand
Whirlpool
Warranty
30-day workmanship

What 6 Pause 1 Pause means

Six blinks, a pause and one blink on an older Whirlpool built-in dishwasher is F6E1. The stated potential cause is a user interface error involving the main control. In plain words, the buttons and display side and the main control are not working together. The dishwasher may not respond to keys or start cycles. Many Houston homes still have these models, and we repair them.

Common causes of 6 Pause 1 Pause

  • The user interface (button panel)
  • The main control
  • The connection between the panel and the main control
  • A passing error cleared by cycling power
✓ One safe check you can try

1. Count the blinks to confirm six, pause, one. 2. Cycle power: unplug the dishwasher for 30 seconds and plug it back in. 3. If it is hard wired, turn its breaker off for 30 seconds and on again. 4. Close the door and try a cycle. 5. If the pattern remains, call for service.

! Why to stop there
  • The code names the interface and the main control together, so a failed reset does not show which one is responsible.
  • We test the panel, the main control and the link between them.
  • The price is written before work, and we say plainly when an older dishwasher is not worth repairing.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

F7E2Whirlpool Dishwasher Code F7E2: Wash Motor Not Responding F8E1Whirlpool Dishwasher F8E1 or H20: Not Detecting Water F8E2Whirlpool Built-In Dishwasher F8E2 and the Fill Valve Circuit F8E4Whirlpool Dishwasher F8E4 Error on a New Install: Fill and Float Checks F8E5Whirlpool Dishwasher Code F8E5: Fill Valve Stuck Open, Act Now F9E1Whirlpool Built-In Dishwasher F9E1 Means Water Is Draining Too Slowly F9E2Whirlpool Dishwasher Code F9E2: Drain Motor Circuit Check FAE4Whirlpool Dishwasher FAE4 or F10E4 Points to the Diverter Valve
6 Pause 1 Pause6 Pause 1 Pause questions
What is 6 pause 1 pause?

It is F6E1, a user interface error tied to the main control. First step: cycle power for 30 seconds. If the pattern stays, the dishwasher needs service.

Why do my buttons not work with F6E1?

The panel and the main control are not communicating correctly, so presses do not register. Resetting power sometimes restores communication.

Do F6E1 and F1E1 point to the same part?

No. F1E1 points to the control module. F6E1 points to the user interface and main control, and our tests cover both.

Book a visit

Still seeing 6 Pause 1 Pause?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107