EV160NZTQ
Whirlpool EV160NZTQ Upright Freezer Repair
Most common issues on this model
- Frost bridging the shelves so contents stick
- Door seal flattened on the hinge side
- Temperature control drifting
- Compressor running hot in a tight space
- Door not closing fully because of frost
The EV160NZTQ is a Whirlpool upright freezer in the EV family with manual defrost and fixed wire shelves. The number also appears as EV160NZTQ03.
Frost is the main service topic on an upright with fixed shelves. It builds on the cold shelf surfaces until packages freeze to the wires and the door will not close all the way. An ajar door then lets in even more humid air. We look at the door seal first, especially on the hinge side where it flattens, then at the control and the compressor.
Uprights often stand in a Houston garage or utility room with little space around the cabinet. Tight clearance makes the compressor run hot, so we check the room around it. The complete number from the model and serial label is confirmed before parts are ordered, and you see a written price first.
Key features
- Whirlpool upright freezer
- Member of the EV family
- Manual defrost
- Fixed wire shelving
- Also listed as EV160NZTQ03
Food is frozen to the shelves in my upright freezer. Why?
Frost bridges between the wire shelves when humid air gets in. A tired door seal is a common reason. We check the seal and advise on defrosting.
Does the freezer need space around it?
Yes. The compressor sheds heat into the surrounding air, so tight clearance makes it run hot. We look at the gap at the sides and back.
The door does not close all the way. Is that serious?
It lets warm air in and builds frost, which in turn keeps the door from closing. Frost on the door edge or a flattened seal usually causes it, and both are fixable once we see which one applies.
Book repair for your EV160NZTQ
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.