Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Wall Oven

Whirlpool Wall Oven Code 3d41: Reseat the Probe, Then Reset

A 3d41 display on a Whirlpool wall oven, such as the WOS51EC0HS, follows the meat probe guidance: make sure the probe is securely inserted in its receptacle, noting that its location varies by model. Many homeowners…

Low risk · DIY check OK
Book a Service Call(713) 589-6107
Code
3d41
Appliance
Wall Oven
Brand
Whirlpool
Warranty
30-day workmanship

What 3d41 means

A 3d41 display on a Whirlpool wall oven, such as the WOS51EC0HS, follows the meat probe guidance: make sure the probe is securely inserted in its receptacle, noting that its location varies by model. Many homeowners find that a probe knocked loose while turning the roast is all it takes, and a quick power reset then clears the message. Reseat it with care.

Common causes of 3d41

  • Probe pushed or pulled out of the receptacle
  • Worn probe plug
  • Probe signal at the control
✓ One safe check you can try

1. Allow the oven to cool first. 2. Reseat the probe fully into its receptacle. 3. Turn the breaker or breakers for the oven off for one minute, then back on. 4. Check the display for a minute and confirm normal operation.

! Why to stop there
  • The code leaves open whether the probe, the receptacle or the control reading is behind it.
  • We test the probe with the oven off and then in use.
  • We give you a written price if a part is needed.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Wall Oven codes

9d42Whirlpool Wall Oven Code 9d42: Door Message That Will Not Clear 9d51Whirlpool Wall Oven Code 9d51: Door Sensing When Heat Will Not Start 9d52Whirlpool Wall Oven Code 9d52: Door Code on a Combination Oven 9d61Whirlpool Wall Oven Code 9d61: Reset Steps If the Door Will Not Latch 9d62Whirlpool Wall Oven Code 9d62: Last of the Door Codes Call ServiceWhirlpool Wall Oven Message "Call Service": Cancel and Reset Demo ModeWhirlpool Wall Oven Message "Demo Mode": Turning It Off Door in Microwave DisplayWhirlpool Wall Oven Message "Door in Microwave Display": Door Switch Input
3d413d41 questions
My roast shifted and 3d41 appeared. Is that likely the cause?

It is quite possible, since a plug pulled partway out breaks the probe circuit. Reseat it firmly, reset power, and see whether the code returns afterward.

Can I replace the probe myself?

The oven's probe is a user-handled accessory, so you can reseat it. Do not open the oven or touch its wiring; we handle the internal checks.

When should I call you for 3d41?

Call if it returns after reseating the probe and resetting power, or if the oven refuses normal baking while 3d41 stays on the display. We then test the circuit.

Book a visit

Still unsure about 3d41?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107