Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Microwave

Code 4d52 in a Whirlpool Built-In Microwave: Door Switch Condition

On Whirlpool built-in microwaves and microwave drawers, for example the WMC50522AS, 4d52 appears when the oven door latch assembly, the door switch, or the wiring associated with them reports a problem. The oven has to confirm…

Medium · inspection needed
Code
4d52
Appliance
Microwave
Brand
Whirlpool
Warranty
30-day workmanship

What 4d52 means

On Whirlpool built-in microwaves and microwave drawers, for example the WMC50522AS, 4d52 appears when the oven door latch assembly, the door switch, or the wiring associated with them reports a problem. The oven has to confirm the door state before heating, so the code usually comes with a unit that will not start or ends its cycle early. The display holds the code until the condition is gone.

Common causes of 4d52

  • Door switch not signaling the door state correctly
  • Latch assembly misaligned or worn
  • Connector or wire along the latch circuit
  • Temporary condition cleared with a power cycle
✓ One safe check you can try

1. Open the door, then close it fully until it latches. 2. Turn the breaker for the microwave off and wait a minute. 3. Switch it on. 4. Keep an eye on the oven for one minute for any sign of 4d52. 5. Test with a short cooking cycle.

! Why to stop there
  • Repeated 4d52 points us toward a physical test of the latch and switch contacts
  • We look at door alignment and wiring at the same visit
  • We quote in writing before work and warrant workmanship for 30 days
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
4d524d52 questions
My microwave drawer shows 4d52 but closes fine. What now?

Close it fully, then do the one-minute breaker reset and watch the oven for a minute. If the code returns, the latch assembly, switch or wiring needs a test, and we handle that with the unit disconnected from power.

Could a bent or loose door cause this?

A door that does not seat squarely can miss the switch. We check the alignment and the switch contacts, then the wiring, before suggesting parts.

Do you repair this on older units too?

Yes. Many older built-ins are still in homes across Houston, and the latch and switch parts are usually serviceable. We tell you plainly when a repair is not worth it.

Book a visit

Still seeing 4d52?

A technician diagnoses it on site and gives you the price in writing before any work starts.