Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Dishwasher

Whirlpool Portable Dishwasher Clean/Complete Light: Flashing or Steady

On a Whirlpool portable dishwasher, the Clean or Complete light can mean two things. If it is lit steadily at the end of the cycle, that is normal. If it is flashing, the checks are the…

Low risk · DIY check OK
Book a Service Call(713) 589-6107
Code
Clean/Complete Light
Appliance
Dishwasher
Brand
Whirlpool
Warranty
30-day workmanship

What Clean/Complete Light means

On a Whirlpool portable dishwasher, the Clean or Complete light can mean two things. If it is lit steadily at the end of the cycle, that is normal. If it is flashing, the checks are the overfill protection float and the water supply. The float must move up and down freely, and the water supply must be turned on, which matters most right after a new installation.

Common causes of Clean/Complete Light

  • The overfill protection float stuck
  • The water supply to the dishwasher turned off
  • A control error cleared by cycling power
✓ One safe check you can try

1. If the light is steady at the end of the cycle, nothing is wrong. 2. If it is flashing, check the overfill protection float moves up and down freely, and press down to release it. 3. Make sure the water supply is turned on. 4. Cycle power: unplug the dishwasher for 30 seconds and plug it back in. 5. Try a cycle.

! Why to stop there
  • A flashing light that continues with a free float and water on means the control or a sensor is involved.
  • We test the water-level circuit and the control.
  • You see the written price first, and we say plainly when a portable dishwasher is not worth repairing.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

Start/ResumeWhirlpool Portable Dishwasher Start/Resume Light Flashing: Cycle Interrupted F6E4Whirlpool Built-In Dishwasher F6E4: Float Switch and Leveling F7E2Whirlpool Dishwasher Code F7E2: Wash Motor Not Responding F8E1Whirlpool Dishwasher F8E1 or H20: Not Detecting Water F8E2Whirlpool Built-In Dishwasher F8E2 and the Fill Valve Circuit F8E4Whirlpool Dishwasher F8E4 Error on a New Install: Fill and Float Checks F8E5Whirlpool Dishwasher Code F8E5: Fill Valve Stuck Open, Act Now F9E1Whirlpool Built-In Dishwasher F9E1 Means Water Is Draining Too Slowly
Clean/Complete LightClean/Complete Light questions
Is it normal for the Clean light to stay lit?

Yes, if it is lit and not blinking when the cycle finishes, that is normal. It is only a concern when it flashes.

Why is the Clean light flashing on my portable dishwasher?

Check that the overfill protection float moves freely and the water supply is on. Those are the first checks, especially after a new installation.

Does a flashing light mean a flood risk?

The float protects against overfilling, so if it is stuck, stop and clear it. After any water spill, keep the dishwasher unplugged until it has been inspected.

Book a visit

Still unsure about Clean/Complete Light?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107