Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Wall Oven

Whirlpool Single or Double Wall Oven Code 1c31: Oven Control

1c31 appears on Whirlpool built-in wall ovens, single, double or microwave-combo, for example WOS51EC0HS, WOD51EC0HS, WOC54EC7HS and WOS72EC7HS. Where 1c1c and 1c2c name the keypad, this code names the oven control, the board behind the display,…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
1c31
Appliance
Wall Oven
Brand
Whirlpool
Warranty
30-day workmanship

What 1c31 means

1c31 appears on Whirlpool built-in wall ovens, single, double or microwave-combo, for example WOS51EC0HS, WOD51EC0HS, WOC54EC7HS and WOS72EC7HS. Where 1c1c and 1c2c name the keypad, this code names the oven control, the board behind the display, and the wiring that serves it. You will see 1c31 and the oven may not heat or accept settings. The code identifies where we look and does not show that the control is dead.

Common causes of 1c31

  • Oven control board
  • Wiring and connectors at the oven control
  • Power conditions upsetting the control
✓ One safe check you can try

1. Turn the oven off and shut its circuit breaker for one minute. 2. Switch the breaker on again. 3. Watch the display for sixty seconds in case 1c31 comes back. 4. When the display is clear, check that the oven operates properly.

! Why to stop there
  • The oven control is a costly board, so a repeat of 1c31 means we confirm the cause by testing before suggesting a replacement.
  • We start with the wiring and connectors, which are the simpler causes.
  • The written price comes first and the work carries a 30-day warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Wall Oven codes

Call ServiceWhirlpool Wall Oven Message "Call Service": Cancel and Reset Demo ModeWhirlpool Wall Oven Message "Demo Mode": Turning It Off Door in Microwave DisplayWhirlpool Wall Oven Message "Door in Microwave Display": Door Switch Input F1 E3Whirlpool Combination Wall Oven Code F1 E3: Microwave Manager Check 9d42Whirlpool Wall Oven Code 9d42: Door Message That Will Not Clear 9d51Whirlpool Wall Oven Code 9d51: Door Sensing When Heat Will Not Start 9d52Whirlpool Wall Oven Code 9d52: Door Code on a Combination Oven 9d61Whirlpool Wall Oven Code 9d61: Reset Steps If the Door Will Not Latch
1c311c31 questions
What is the oven control?

It is the main board that runs the oven, behind the display. 1c31 says it or its wiring is reporting a problem. It sits behind the display and decides when the oven heats, so a problem there can stop several functions at once.

Is the oven safe to use after a reset?

If the code stays gone and the oven heats normally, yes. If 1c31 returns, stop using it and call us. One clean reset is a good sign, but keep an eye on the oven for a few days and call if it returns.

Is replacing the control always necessary?

No. We check wiring and connections first. We replace the board only if testing shows it is the cause, and the price is quoted first.

Book a visit

Still seeing 1c31?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107